Posts Tagged ‘Scratch Building’

Very quick update of the progress so far. All my attention has been on completing the roof

and internal roof space. The 1/48 scale Citroen parked outside is just a guide for scale.

Next up is prepping the ground floor for some interior design work and painting.

A much needed update on my chateau project. Things have finally started moving again as I have cleared by back log of painting during the covid 19 lock down.


As you can see, I have been working on the ground and second floor and have just started on the third floor and attic space. It still looks a bit Heath Robinson at this stage but once I get some paint on it will come on really quickly. One thing that has surprised me is the sheer scale of it as it comes together. I wanted a scratch-built Chateau as nothing on the ready built market ticked the box in size or detail, even so this going to be a beast.


Things that have slowed me down are the planning of how everything will fit together and allowing access to all rooms and spaces for figures. Its difficult making whole floors that can be separated for game play and structurally solid at the same time, especially in foam card.


Interior design will include marble floors using marble effect sheet, wooden flooring using model boat planks and dolls house wall paper for a lot of the rooms. Fire places have been scratch built and I intend to fill out every room but in a moth ball type state if that makes sense. So white sheets over chairs etc etc.
Big thankyou to my laser cutting friend who was responsible for turning my very basic diagrams into some fantastic looking windows and doors.


Next challenge will be the roof which is a Mansard and the dormer windows protruding from it. The roof will most likely be the most complicated part of the building and I think it will test my limited building ability to the max. Wish me luck.

Been busy at home during this corona virus lock down

adding bits and pieces . This is a simple large, fallen

oak tree made from wire wrapped in woodland scenic flex

paste. The canopy is made from a floor cleaning pad that

was ripped up and the roots are a combination of sponge, real

dirt and rubberised horse hair. Basically anything spare lying

about was included in the build.

Just a small update of progress being made during these strange and worrying times.

The picture is of a mock up for the front entrance of the chateau before I start

gluing things in place. I have an excellent contact who is able to make most

things from laser cut mdf and he is responsible for the brilliant doors and windows.

I now have a large ready made supply of doors and windows for the project so things

should start to get a move on shortly.

After the success of my foam card French house project in 2019 I have

decided to be a bit more adventurous and go the whole hog and build

a chateau. I love individually built terrain as it brings something

unique to the table top, that combined with a desire for centre piece

for the table fits perfectly with the idea of building a chateau.

On top of this a lack of ready made buildings is driving me on and

the strange discovery of a beautiful abandoned chateau online has

aroused by creative curiosity.

I discovered the beautiful abandoned chateau online while searching

for images. It turns out there is unique bunch of urban explorers who

specialise in discovering and photographing derelict and abandoned properties.

The details of many of the places are kept secret as once a location is

known it often becomes vandalised. Luckily with a bit of research I was able

to locate the said chateau on google maps helping me get a better idea of

the layout. Sorry the chateau location stays a secret and my chateau name

is fictional.

So progress so far is slow, but its a start and I’m finding the scale

and complexity challenging for my basic ability.

I have measured the whole thing out and drawn a master diagram. I have

also started cutting out the ground floor walls. On top of this I have

started on some of the internal room features such as fire places etc.

I am presenting working on the internals wall and will post up pics

shortly.

Chateau diagram

This was my first real adventure of using foam card to scratch build a bit terrain
and I think it went really well.

Ok, so why scratch build your own terrain ? Your fed up with the lack commercially available
terrain on the market and you want something different, a piece of terrain that will stand out
on the gaming board as something special. Plus you get the satisfaction of doing it yourself.

I choose foam board as its the cheapest(its cheap if you buy in bulk) and easiest material to work
with. I used Kapa lined foam board as it has a simple outer layer than can be peeled off and then
sculpted. A word of warning, there are lots of companies that sell foam board but I have yet to
find any that easily peels off the outer surface, thus making it useless.

The sections of the house were easy to cut with a very sharp knife and glue together using simple
pva glue. The stone texture was created by stripping off the outer layer of the foam card and using
a pencil to gently mark the individual bricks.
I had the windows and doors made in bulk from laser cut mdf(£20 will get you 30 doors and 60 windows of various sizes),leaving me plenty spare for additional projects.
The outer wooden panelling is made from balsa wood strips, the lower barn type building roof is a scalecast mould
and the taller house roof is made from embossed sheets.
The chimney is also foam board and the chimney pots are 1/48 scale dolls house chimney pots.

 

I needed some more scenery for my Bolt Action boards and

noticed there is a lot of farm equipment made by Britains that

would nicely do the job on fleabay. Its 1:32 scale according to

the official guide but I think a lot of the Britains stuff fits in

quiet nicely if your not to particular.

You get a white plastic kit in sections for £10 and not much else.I

managed to get a grass roller thrown in as well(it all helps).

I assembled the greenhouse and added some wooden boards for

plants made from balsa wood and added a stone paving effect

path inside.

I then based the greenhouse on plasticard and added various bits

inside giving the look of a discarded neglect. The rusty roller went inside

along with some Noch plant pots and various odds and ends. I also

added an out of control creeper escaping through the roof.

The glass is clear plasticard with a green wash to represent mould and

decay.

And goodnight from the greenhouse.

Built from scratch and meant to fit into a Normandy WWII

terrain landscape..

I went for the disused ,overgrown and neglected look in

the end. I like the idea of it sitting in one corner of the farm

slowly rotting like the apples, awaiting better days.

Perhaps a pile of rotting apples next to it might be the next

bit of scratch built terrain ?

In an attempt to get started on my Bolt Action terrain

boards I am getting stuck into the fine detail. I wanted

something extra and typical in a Normandy farm yard,

thus the cider press.

Normandy is covered in apple orchards and is famous

for its drinks made from apple juice. These include,

Cidre(Cider) apple wine fermented from apple juice,

Calvados(apple brandy) distilled dry fermented cider

which is then aged in oak barrels, Pommeau(aperitif)

unfermented apple juice and apple brandy aged in oak

barrels and finally Benedictine(herbal liquer) a mixture

of plants and spices distilled in oak barrels.

All these were made on an industrial scale and more

importantly a very local scale. If you had century old

apple or even pear orchards on your land then all

you had to do was build a rustic apple press from

spare timber and let the happy times begin.

My simple press is meant to look as rustic as

possible and simply works by dropping apples

into the wooden barrel usually within a muslin

or cloth wrap. The long pole will be attached to

the top and would have been turned forcing a simple

wooden block board down squashing the apples. The

pomace(juice) runs out via a funnel/pipe at the bottom.

Obviously at the moment its not complete and requires

some legs and painting. If your wondering what the silver

bands  are around  the barrel,they are artist foil.

I will post up the finished product soon perhaps with a

scratch built apple run as well.

Oh I have also been making some Cidre bill boards to

advertise on the road side.

Below is a typical Normandy cidre press found

on every farm.

Scalextric fun

Posted: January 24, 2017 in Scalextric, Scratch Built
Tags: ,

.scale1

My son got a Scalextric set for Christmas and its only

a matter of time before I build a permanent layout board

for him, so to keep me going in the mean time I have started

experimenting. The first problem area for any child using

Scalextric is mastering the corners and watching your Dad pick

up the cars. So I decided to limit my bending to the floor and

start improving the barriers.

The basic plastic Scalextric barrier was removed and three upright

steel looking posts(borrowed from a 00 train layout) were attached

to the outside of bend. I then used some 40k fencing and attached that

to the posts and painted to a metal, rusty finish. The aim of the fence

was to stop those high speed cars that become airborne. Oh I also added

to lengths of cable wire through the top parts of the posts.

I then added an after market tyre wall made from foam to absorb the

impact of the cars and gently bounce them back towards the track.

Finally I added a fine gravel bed of glued down sand which was then sealed

over. This has the effect of giving the cars more traction when they

start to slide away on the bend.

scale2

Anyway that’s one bend section done, now onto the other 15 !!!